Free Same Day Shipping
View Shopping Cart
what our customers say:

Great customer service! 98 Silverado... already improved the gas mileage! I ... read more

Brett Jones - Wisconsin

Read More
HomeHypertechHypertech Max Energy

Hypertech Max Energy


Hypertech Max Energy tuning allows you to get the very most out of your vehicle. These programmers from allow you to extract every bit of energy possible from your vehicle's fuel. In an effort to increase engine efficiency, horsepower, and torque, the engineers at Hypertech optimize the spark and fuel curves point by point over the whole rpm band. Because of that, you'll use less fuel to accelerate and maintain speed when you use a Max Energy tuner.  It's important to get the most out of your vehicle - whether it's a truck or a muscle car. Take the time to give your vehicle what it deserves by installing a Max Energy tuner from You'll be pleased with your vehicle's improved performance. And we're sure your vehicle would thank you if it could!

February 15 2013: Hypertech Tuning Released for Ford F150 EcoBoost
Hypertech announces the release of performance tuning for the 2011-2013 Ford 3.5L EcoBoost trucks. Hypertech aftermarket tuning for the Ford 3.5L EcoBoost is available in the Hypertech Max Energy part number 42051.

August 1, 2012: New Hypertech Max Energy Support for 2006-2012 GM Cars & SUV's
Hypertech has announced new Max Energy programming for the 2006-2012 Chevy Cobalt, Chevy HHR, and Chevy Malibu 2.4L, along with the 2006-2012 Pontiac G5/G6 and Solstice 2.4L, and the 2006-2012 Saturn and Sky 2.4L. This powerful new tuning is available on the Hypertech Max Energy 32501.

Hypertech Max Energy Part 32501

  • Optimized engine tuning for regular and premium octane. Premium tuning produces +12hp and +12tq.
  • Speedometer and odometer correction for non stock tire sizes.
  • Adjust automatic transmission shift firmness.
  • Lower or raise the top speed limiter.
  • Adjust rev limiter.
  • Read and clear trouble codes.

July 18, 2012: New Hypertech Max Energy Support for 2013 GM Trucks & SUV's
Hypertech has now added support to the Max Energy programmers for the 2013 Chevy, GMC 4.8L, 5.3L 6.2L Trucks & SUV's. Hypertech Max Energy overage for these 2013 GM's is available with part number 32501.

May 23, 2012: Hypertech Max Energy now Supports 2008-2012 Chevy Colorado & GMC Canyon
Hypertech has now added support for 2008-2009-2010-2011-2012 Chevy Colorado 3.7L gas trucks as well as 2008-2009-2010-2011-2012 GMC Canyon 3.7L Gas Trucks. This performance tuning is available on the Hypertech Max Energy 32501.

January 31, 2012: Hypertech Announces Coverage for the Ford 3.7L V6
Hypertech proudly introduces coverage for the 2011-2012 Ford F150 3.7L V6 trucks. The Hypertech Max Energy 42501 for the 2011-2012 Ford F150 3.7L V6 trucks produces an additional 10hp and 14 ft lbs of torque, along with the ability to alter transmission settings and many other factory specs. The Hypertech Max Energy 42501 is available and shipping at this time.

December 23, 2011: Coverage Announced for the 2011-2012 6.6L Duramax Diesel
Hypertech announces First to Market coverage for the 2011-2012 Chevy and GMC 6.6L Duramax. This powerful new tuning will ad 40 hp and 63 lbs of torque to these GM trucks. The Hypertech 32501 also allows you to optimize the tuning for aftermarket cold air intakes, as well as adjust speedometer and odometer for different size tires and gears.

Also available for the 2011-2012 Chevy and GMC Duramax 6.6L Diesels is a fast relearn feature for your Alison Transmission. The Allison Transmission and controller on the new GM pickups is a very complicated piece of technology. The controller constantly monitors the transmission performance and adjusts the operating pressures in small increments to ensure the longevity of the transmission. With the increase in power that the Hypertech Max Energy 32501 for 2011-2012 Chevy and GMC 6.6L Duramax Diesels provides, Hypertech also adjusts the transmission calibration with necessary parameter changes to handle the additional power. This results in noticeable improvement in shifting feel and drivability that matches the increase in power rather than relying on the transmission controller to slowly adjust the settings.

December 08, 2011; Article: Hypertech part number consolidation of Hypertech Max Energy vehicle programmers September 28, 2011; Article: Hypertech Announces coverage for 2012 Ford Mustang 3.7L V6 and 5.0L V8's
Hypertech proudly announces the release of aftermarket performance tuning for new Hypertech Max Energy 2012 Ford Mustang 3.7L V6 and Ford Mustang 5.0L V8's. Coverage is available on the Hypertech Max Energy part number 42012.

September 15, 2011; Article: Hypertech Announces Hypertech Max Energy Coverage for 2010-2011 Camaro 3.6L V6
Hypertech has announced it's much anticipated release of after-market performance tuning for the 2010-2011 Chevy Camaro 3.6L V6's. The Hypertech Max Energy 32006 for Chevy Camaro 3.6L V6's offers regular and premium fuel tuning, along with a whole list of options. The Hypertech Max Energy 32006 will also provide owners of the Chevy Camaro 3.6L specific custom tuning for most after market cold air intakes.

May 12, 2011; Hypertech Announces Hypertech Max Energy Coverage for 2011 Expedition and Navigator
Hypertech has announced coverage for the 2011 Ford Expedition and Lincoln Navigator with the 5.4L V8. Owners of these new SUV's will enjoy an additional 36 horse power and 42 lbs of torque. These vehicles are being added to existing Hypertech Max Energy 42010.

May 10, 2011; Hypertech Announces Hypertech Max Energy Coverage of the 2011 F-150 5.0L V8

New Application Release Notice!

Hypertech has now added support to the Max Energy and E-CON programmers for the 2011 FORD F-150 5.0L V8.

Applications Added:

2011 FORD F-150 5.0L V8

Part Numbers & Descriptions:



Max Energy Features

- Regular and Premium Fuel Tuning
- Top speed limiter adjustment:
- 25- 75 MPH in 5 MPH increments
- 81- 255 MPH based on tire speed rating
- Speedometer and odometer correction for 24” - 54” tires
- Speedometer and odometer correction for rear axle gear ratios: 2.73, 3.08, 3.27, 3.31, 3.55, 3.73, 3.90, 4.10, 4.30, & 4.56
- Adjustable transmission shift firmness: 25%, 50%, 75%, 100% (1-2, 2-3, 3-4, 4-5)
- Adjustable cooling fan on/off temp: (180 deg & 195 deg)
- Reads, displays, and clears diagnostic trouble codes (DTCs)


- Regular Fuel Tuning
- Reads, displays, and clears diagnostic trouble codes (DTC’s)

April 14, 2011; Hypertech Announces Hypertech Max Energy Coverage of the 2011 F-250 and F-350 6.2L
Hypertech announces coverage of the 2011 Ford F-250 and F-350 trucks equipped with the 6.2L V8. This new application includes a 91 or a 87 octane tuning, and provides an impressive 15 hp and 19 lbs of torque when using the 91 octane tune In addition to increased hp and torque, the Hypertech Max Energy will also allow owners of these late model trucks to adjust shift points and shift firmness, adjust speed and rev limiters, as well as adjusting the cooling fan on/off temperatures. Coverage for the new 2011 F-250 and F-350 6.2L V8 is available on the Hypertech Max Energy part 42010.

March 24-2011; Hypertech Announces Coverage of the 2010 Dodge & Chrysler SRT8 6.1L Hemi
Hypertech is proud to announce coverage of the 2010 Dodge & Chrysler SRT8 6.1L Hemi engines. Coverage is included through the Hypertech Max Energy part number 52002. The Hypertech Max Energy tuner will add an additional 16hp and 16 lbs of torque, as well as optimizing your vehicles performance and drivability by allowing owners to adjust the top speed limiter, adjust fan controls, change top speed limiter and more. Owners of the Dodge & Chrysler SRT8 6.1L Hemi's can also adjust and recalibrate their speedometer and odometer to correct for tire and gear changes. The Hypertech Max Energy 52002 is available for immediate delivery through

March-03-11 Hypertech Announces the release of new Hypertech Max Energy part number 42012 for 2011 Ford Mustang V6 and V8's
Hypertech has just announced the release of the new Max Energy programmer part number 42012 for all 2011 FORD MUSTANG 3.7L V6 and 5.0L V8 vehicles. The new Hypertech Max Energy 42012 is available for immediate shipment at

February-08-11 Hypertech Announces the release of new Hypertech Max Energy part number 32010 for Chevy/GMC Gas Trucks & SUV's
Hypertech, a world leader in performance engine tuning, proudly announces the release of the Hypertech Max Energy part number 32010 for Chevy and GMC vehicles with the 4.8L, 5.3L, and 6.2L V8 engines. The new Hypertech Max Energy 32010 is available at for immediate delivery. This added coverage includes the Chevy Avalanche, Silverado, Suburban, and Tahoe, the Cadillac Escalade, and the GMC Sierra and Yukon vehicles.


30 Day Risk Free Money Back Guarantee

The 30 day money back guarantee applies to the Max Energy Power Programmer, E-CON Power Programmer, and the Speedometer Calibrator. The product MUST be returned to within 30 days of purchase. All items must be received in a new, unused and ready to sell condition( including all original packaging, parts, and paperwork) to receive a refund, excluding actual shipping charges and a 15% handling fee.

Product Warranty

Factory direct Limited Lifetime Warranty

All Hypertech Power Tuning Products are warranted* against defects in materials or workmanship. Hypertech's liability under this warranty shall be limited to the prompt correction or replacement of any defective part of the product which Hypertech determines to be necessary. This Limited Lifetime Warranty is to the original purchaser for as long as he or she owns the vehicle on which the product is originally installed, providing all the information requested is furnished. You must retain a copy of the original sales invoice or receipt. Without proper documentation, a service fee will be applied. Resold units are NOT covered under this warranty.

Return Your Vehicle To Stock Tuning BEFORE Taking Your Vehicle In For Service

If you take your vehicle to a dealer or mechanic for service, you must first remove the Hypertech Tuning and restore the stock programming. this is because the diagnostic devices expect to find stock calibrations and will often overwrite the program if the latest stock calibration is not found in the computer's memory. This will result in the loss of the Hypertech Tuning data. The Power Tuning can be easily removed to restore the stock tuning before you take your vehicle in for service, enabling the service technician to upgrade your stock calibrations. after the service is complete, you can reinstall your Hypertech Power Tuning. If you have any questions related to service issues, please call Hypertech at 901.382.8888.

Hypertech Products Are Street Legal & Clean

In the interest of improving air quality, the California Air Resources Board (CARB) requires new vehicle and manufacturers of aftermarket parts to develop engine and emissions equipment that either reduces or maintains air pollutants affected by vehicle use. Both the California Vehicle Code (Section 27156) and the Federal Clear Air Act (administered by the Environmental Protection Agency) prohibit modifications that increase vehicle emissions.

Hypertech includes meeting all E.O. requirements in its product development process. This guarantees that users of Hypertech Power Tuning products will meet certification requirements when registering, selling or needing to pass various emissions tests or Inspection and Maintenance (I&M) programs administered by state or local enforcement agencies. So, on an ongoing basis, Hypertech obtains and includes CARB E.O.s for it's emissions related products. This ensures these products are not detrimental to ambient air quality and meet requirements necessary for their legal sale and used. Make sure that any emissions related product you buy and install carries an EO number. Without this verification you are at risk of potential violation of regulations and may incur unnecessary financial expense during vehicle inspection.

We accept Visa, Discover, Mastercard, American Express, PayPal
©2010 Vehicle All Rights Reserved.
Yahoo! Store by Solid Cactus